Haven’t been able to make a clean shot this season? Well, blame it on the gun….really! As it turns out, the problem may not actually be yours, despite what all of your buddies have been telling you. The truth is, a clean rifle is an accurate rifle. Your firearms require cleaning to blast away carbon, grease, powder residue and oil build-up leaving the firearm clean and ready for lubrication. In order to ensure safe and effective cleaning, begin by emptying the chamber and placing your rifle in a stationary device. Next, use a bronze brush with a solvent to go down the bore, one pass down and back, to break up heavy build-up. A gun cleaning solvent should loosen and/or dissolve carbon and/or metal fouling in the bore so that a patch can wipe it clean. Insert it carefully through the breach, toward the muzzle, and retract it. Now you are ready to patch the bronze brush. Slide it gently into the bore, pushing it through and pulling back until your bore is clean. A patch that is no longer stained with heavy black residue is indicative of a job well done.
If you are planning on storing your rifle for awhile after it has been cleaned, consider applying a lubricant to the patch at the end of your brush. Carefully reinsert it into the chamber and bore, push it through and withdraw the brush. This thin coat will help to protect your rifle during the months that you are not using it. Not certain which lubricant to use? LPS 1 Greaseless Lubricant offers short term protection and is safe to use on all parts including bore, buffer tube, pins, springs, trigger components, frame, mag wells, bolt carrier and slide. Additionally, it conditions metal surfaces and reduces wear caused by friction and corrosion. On the other hand, LPS 2 Heavy-Duty Lubricant protects for up to 12 months in storage and will not attract sand, dirt or fouling, so it helps ensure long-lasting, reliable firearm function. Formulated to go on wet and stay wet, LPS 2 coats and lubricates internal parts to prevent binding. Additionally, LPS 3 Premier Rust Inhibitor is an excellent long term storage alternative. It’s soft, waxy film protects and prevents metal from corrosion when stored indoors for up to two years .
As a general rule, clean your barrel every ten shots if you require top accuracy. Be sure to lubricate the areas around rotating parts, such as the bolt and trigger assembly. Also, try to keep grease away from the openings into the firing pin housing and don’t forget to oil the bolt rails and grooves in which they ride. Caring for and protecting your parts will go a long way in maintaining the integrity of your rifle and your reputation!