Sign Up for the JD Industrial Supply E-mail Club.

Receive Coupons To Our Store

New Product Updates

Newsletters


Click here to see example EMail


September 8, 2011 on 2:36 pm

Band-It Clamping company manufactures several mounting Brack-It’s for mounting signs securely. Choosing the correct mounting hardware  significantly reduces call backs due to sign shifting.  Wind, vibration and other environmental factors are things to consider before installation.  All Band-It Brack-It’s are manufactured with high strength stainless steel and metal forming technology that adds reinforced fibbing for addition stiffness.     Our goal is to simplify which Brack-It is used for your specific application.

The Flair Leg BRACK-IT design provides a secure fit that locks each leg in
place on round poles or mast arms of almost every diameter.

• Use the D31099 single bolt, flaired leg Mini- BRACK-IT and 1/2″ band
when the post is less than 3 1/2″ diameter and signs are less than 3
square feet.
• Use the D02189 single bolt Flaired Leg BRACK-IT and ¾” band when
mounting on round posts greater than 3 1/2” or with larger signs.

Straight Leg BRACK-IT design should be used when mounting a sign on a flat
surface or to straddle the shape of fluted poles.

• Use the D31599 single bolt, Straight Leg Mini BRACK-IT and ½” band
when the signs are less than 3 square feet.
• Use the D00189 and ¾” band for larger signs.
• For greater sign support surface area and holding force use the D00889
2-bolt straight leg BRACK-IT.

 

 

 

 

Leave a Reply

Home