April 28, 2011 on 2:39 pm

Band-It hose attachment products can be used on a variety of industrial hoses in transportation environments including: fuel, liquid and chemical transport hoses, vacuum truck hoses, marine hoses, waste water hoses, rail and light rail hoses.  Hose clamps are available in several materials including galvanized carbon steel and 201, 301, 316 stainless steel.  Stainless Steel hose clamps are manufactured to withstand corrosive environments.

Band-It Hose Attachment Products

 

C00269 Jr. Hand Tool:  Use to apply Jr. Preformed clamps and BAND-IT Jr. Smooth ID Clamps

Band-It Jr. Smooth ID Clamps can be used on a variety of industrial hoses in transportation environments including fuel, liquid and chemical transport hoses, vacuum truck hoses, marine hoses, waste-water hoses, rail and light rail hoses.  The smooth inside diameter produces a uniform clamping surface to prevent leak paths while the lower profile reduces the risk of snags when dragging industrial hose assemblies.

Band It UL4000 is the fastest an most effective way to apply Ultra Lok Preformed Clamps

Band It’s ultra-lok hose clamp system was developed with speed and precision in mind. These preformed clamps have the tightest clamping force for tough demanding applications.

The Center Punch Clamp Tool is used to apply  Center Punch hose Clamps.

BAND-IT center punch clamps are available in 201 stainless steel or heat treated galvanized carbon steel. Center Punch Clamps are locked with a standard conical punch, ensuring a strong, powerful lock for reliable hose clamping.

April 15, 2011 on 4:46 pm

Choosing the correct banding product for your application can be very confusing.  There are a lot of variables that contribute to the correct size and metal needed.   Strength and durability play a huge part in every job and banding application.  The two major groups  of steel discussed are 201 Stainless Steel and 316 Stainless Steel.  We have tired to simplify were each type of metal is used by giving a few examples.  Below there is a chart with the average breaking strength in relation to width of the steel band.

Band-It 201 Stainless Steel Banding provides a good economical band suitable for a wide variety of light duty applications. Municipalities use Band-It 201 Stainless Steel Strapping to secure traffic signs, signals, banners, decorations, control boxes, cables, conduit and traffic & security cameras to any shaped pole.  It virtually eliminates the need for nuts & bolts and the various tools needed to fasten them. Workers in the field like  the speed of installation.  Band-It unique Ear-Lokt Buckles allows the installer to effectively double wrap this 201 Stainless Steel Strapping.

Band-it 316 Stainless Steel Banding combines superior corrosion resistance with high strength to withstand the harshest chemicals and the most extreme weather conditions on land or sea.  Some applications include Oil, Gas Pipeline  insulation, banding-onshore as well as offshore. Other uses also include chemical,  food & beverage, banding of insulation on storage tanks. The speed and ease of installation make them a maintenance workers dream.

Band-It 201 SS 1/4″ Banding: Average Breaking Strength: 500 lbs.  201 SS 1/4″ Ear-Lokt Buckles

Band-It 201SS 3/8″  Banding: Average Breaking Strength: 900 lbs: 201 SS 3/8″ Ear-Lokt Buckles

Band-It 201 SS 1/2″ Banding: Average Breaking Strength: 1500 lbs: 201 SS 1/2″ Ear-Lokt Buckles

Band-It 1/2″ Band and Buckle Kit

Band-It 201 SS 5/8″ Banding: Average Breaking Strength: 1875 lbs: 201 SS 5/8″ Ear-Lokt Buckles

Band-It 201 SS 3/4″ Banding: Average Breaking Strength 2250 lbs: 201 SS 3/4: Ear-Lokt Buckles

Band-It 3/4″ Band and Buckle Kit

Band-It 201 Stainless Steel Banding

 

 

 

 

 

 

 

 

Band-It 316 SS 1/4″ Banding: Average Breaking Strength 400 lbs: 316 SS 1/4″ Ear-Lokt Buckles

Band-It 316 SS 3/8″ Banding: Average Breaking Strength 750 lbs: 316 SS 3/8″ Ear-Lokt Buckles

Band-It 316 SS 1/2″ Banding: Average Breaking Strength 1200 lbs: 316 SS 1/2: Ear-Lokt Buckles

Band-It 316 SS 5/8″ Banding: Average Breaking Strength 1500 lbs: 316 SS 5/8″ Ear-Lokt Buckles

Band-It 316 SS 3/4″ Banding: Average Breaking Strength 1800 lbs: 316 SS 3/4: Ear-Lokt Buckles

Band-it 316 Stainless Steel Banding

 

 

 

 

 

 

 

Tools needed to apply Band-It Stainless Steel Banding:

Band-It C00169 is used to apply both 201 and 316  BAND-IT Stainless Steel Banding .  Tensions over 2,400 lbs of force and cuts off the tail of the clamp being formed.  A blue powder coated finish protects this tool from rust and corrosion.  C00169 Directions

Band-It C00369 is used for applications requiring extra strength. Tensions over 3,300 pounds of force.  Manufactured with a extra heavy duty tough design.  C00369 Directions

Band-It C07569 Bantam Tool is a compact light weight ratcheting tool with a built in cutter.  3 way handle adjusts for one or two-handed tensioning .  Can also be used for general purpose strapping.   C007569 Directions

Band-It Tool C00169

Band-It Heavy Duty Tool C00369

April 6, 2011 on 5:30 pm

Remember when soap was just soap?   It’s amazing how personnel hygiene products have changed over the years.   We now have foam soap, spray soap, liquid soap and gel.  The problem this creates is each type of soap uses it;s own dispenser.  In a plant or office  setting this creates huge headaches for the purchasing agents.  Each department within a building wants a different type of soap.  Liquid in the back, foam soap in the bathroom, spray sanitizers in the office, it goes on and on.   This is not longer a problem thanks to Stoko Skin Cares new 4-in-1 technology.  Stoko has created the Refresh 4-in-1 dispenser that will accept foam, spray, liquid and gel.   Any Stoko Refresh 4-in-1 product will fit this dispenser cutting down on confusion and cost .

Stoko 4-in-1 1000ml Dispenser